The 1991-1998 Harley-Davidson Dyna Glide FXD Evolution repair manual by Clymer covers:. Harley-Davidson FXDB 1991-1992. Harley-Davidson FXDC 1992. Harley-Davidson FXDL 1993-1998. Harley-Davidson FXDWG 1993-1998. Harley-Davidson FXD 1995-1998. Harley-Davidson FXDS-CONV with Evolution engines, 1995-1998 Book Excerpt: 1991-1998 Harley-Davidson Dyna Glide FXD Evolution Repair Manual ENGINE BREATHER GEAR END PLAY: CHECK AND ADJUSTMENT Before final assembly of gearcase components, check the breather gear end play as follows:.
Install the breather gear (A, FIgure 201) and its spacer. (B, Figure 201). Install a new cover gasket onto the crankcase gasket surface. Lay a straightedge across the gearcase at the breather gear spacer.
Then using a feeler gauge, measure the clearance between the straightedge and the spacer (Figure 202). Subtract 0.006 in. (0.15 mm) from the clearance determined in Step 3 to determine breather gear end play. Table 2 lists the correct breather gear end play specification. Replace the spacer (B, Figure 201) to correct the end play.
The GSC300 is designed to provide autostart control, protection, and engine instrumentation for all types of diesel and gas generator sets. The module is easily configured using either the front panel buttons or our PC configurator software.
![]()
Different thickness spacers are available from a Harley-Davidson dealership. TROUBLESHOOTING: TROUBLESHOOTING PREPARATION If you suspect a problem with the ignition system, perform the following procedures in order. Check the wiring harness and all plug-in connections to make sure that all terminals are free of corrosion, all connectors are tight and the wiring insulation is in good condition.
![]()
Check all electrical components grounded to the engine for a good ground. For ground locations, see Figure 47, Figure 48 or Figure 49 for your model. These includes the ignition module, battery-to-frame, and engine-to-frame ground wires and straps. Check that all ground wires are properly connected and that the connections are clean and tight. Clean connectors with electrical contact cleaner.
Check all other wiring and connectors for disconnected wires and short or open circuits. Check for a damaged ignition circuit breaker. NOTE: The ignition circuit breaker mounts behind the electric panel. The fuel tank must have an adequate supply of fuel that is reaching the carburetor. Subject: 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998 Harley-Davidson Dyna Glide FXD Evolution service, maintenance, repair.
ISBN-10: ISBN-13: 710 Clymer M424-2.
. Limited to 10,000 elements. All other capabilities are available. Node-Locked License option ONLY.
LS-DYNA is provided electronically. Manuals electronically with permission to copy. Free Installation support is only through manual & video files. Technical Support & Training are available on additional cost.
In any papers published containing data obtained using LS-DYNA, please mention LS-DYNA and the LS-DYNA User’s Manual as reference. It is avaiable for India, UAE, Bangladesh & Srikanka. LS-DYNA PC – System Requirements/Recommendations Recommended Minimum System Requirements Preferred System Requirement. Windows 2000 and Windows XP. 512 MByte of RAM. 1 GByte hard drive. CD-ROM drive.
A Microsoft-compatible network card. Windows 2000 and Windows XP. 1 Gbyte of RAM. 30 Gbyte hard drive. An SVGA monitor that is capable of handling a resolution of 1,280 x 1,024. A standard VGA video card with at least 32 Mbyte of video memory.
CD ROM Drive. A Microsoft-compatible network card.
Comments are closed.
|
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |